Dns-operations mailing list

[Steve Snyder <swsnyder AT snydernet.net>]

Hi, Alex.

Thanks for the advice.  Now, another question.

In http://wiki.opennicproject.org/Tier2ServerConfig the BIND 8/9 
"Slaving dns.opennic.glue" section refers to file "db.dns.opennic". What 
are the contents of this file?  Is it downloaded from somewhere, or 
should it be created by me?

Thanks again.


On 12/10/2012 07:54 PM, Alex Hanselka wrote:
> On 12/10/2012 6:46 PM, Steve Snyder wrote:
> > 1. The OpenNIC DNS Wiki gives instructions for setting up Tier 1 and
> > Tier 2 servers.  Why would I opt for one over the other?  Which is
> > most in demand?
> You would want to run a T2.  A T1 is for TLD operators. :)
>
> > 2. The server housing my proposed DNS server (BIND 9 running in a
> > chroot'd environment) has very good uptime, but is limited to
> > 3TB/month of network traffic.  Is this limit sufficient to host an
> > OpenNIC DNS server?
> The traffic limit is fine. I usually use around 30-80 GB of data on DNS
> depending on the attacks I see.
>
> > 3. Reading through the BIND set-up doc on the OpenNIC DNS Wiki I am
> > surprised to see no references to DNSSEC.  Did I just miss something
> > or are the OpenNIC zones not signed?
>
> OpenNIC zones are not signed yet.  I believe we are still working on this.
>
> > 4. After I have configured BIND per the OpenNIC doc, how do I submit
> > my addresses (IPv4 & IPv6) for inclusion in the public list of
> > available OpenNIC DNS servers?
>
> You can submit your IPs on the wiki and they are automatically gathered
> from that source!
>
> Hope this helps!
> Alex
>
> ----
> To unsubscribe, email dns-operations-unsubscribe AT lists.opennicproject.org