Discuss mailing list

[postmaster <postmaster AT welcome.factoryfouroh.net>]

This makes two of us then. I really do not care what the zone is called, 
.maker, .manufacture, all is fine by me.

I am not "helpless" with Linux, as the matter of fact I have some mad 
skills with it - I run my own MAAS cluster at home on 4 Proliant, since 
2017 or so. I just made LXD work and I replaced the KVM slices. If I was 
not so busy with 3D printing I would be spending my time with learning 
JuJu, I maintain my own infrastructure on the ICANN side since last year 
- but I am not a formally trained and talented UNIX pro.. I prefer to 
spend my time with manufacturing. Everything I learned about Linux in 
the last 25 years I learned on my own, because it was / it is useful to 
me on the factory floor or in the engineering office.

Lets hope someone is going to be interested to help out on Github or 
some other repo, to store the OpenSCAD script collection. I design with 
care to be able to transfer the models to the mold shop, to the 
punch-presses, to the machine shop. Its not enough to model something 
and print it in plastic, it must be transferable to mass-production. So 
as long as others maintain the infrastructure I can build and maintain 
content wikis - and hopefully attract shop owners, free-lancers and 
other pros and the zone grows.

The ICANN side is insanely commercialized and its becoming a zoo, and 
after what happened with .ORG OpenNIC makes a lot of sense.  I am hoping 
to grow something much closer to an intranet - purposed to contribute 
manufacturing capacity.


On 2020-10-12 15:41, Charles Wyble wrote:
> I’m a strong system administrator . I run a dedicated server at OVH
> CA, and several virtual machines on it with OpenVswitch for networking
> .
>
> I’ve been wanting to dip my toe in the water with OpenNIC.
> Interested in helping out however I can.
>
> I can spin up a VPS for this if desired. I know enough to keep it
> separated out from the main server :)
>
> ——-
> Charles N Wyble
> Founder TSYS Group
> Email: charles AT turnsys.com
> Phone: 818 280 7059
> Matrix: @Charlesnw:turnsys.com
> -------------------------
>
> From: discuss-request AT lists.opennicproject.org
> <discuss-request AT lists.opennicproject.org> on behalf of postmaster
> <postmaster AT welcome.factoryfouroh.net>
> Sent: Monday, October 12, 2020 1:19:26 PM
> To: Discuss <discuss AT lists.opennicproject.org>
> Subject: [opennic-discuss] Manufacturing Zones inside OpenNIC
>
> If you are interested grouping up to create one or more
> manufacturing-related zones, tier servers please reply to this thread.
> I have basic skills with Linux and programming so I prefer
> manufacturing-related role. I would like to work on content
> development,
> and leave admin / management roles to others. I am working on this and
>
> relevant ideas for years, I have some existing content I am happy to
> share under CC-BY-SA.
>
> Cheers,
> Mr. Sandor Kunyik
>
> --
> Low-Cost No-Risk Pilots for Transitioning to Industry 4.0 - a Linux
> User
> Group for the Manufacturing Sector
>
>
> --------
> You are a member of the OpenNIC Discuss list.
> You may unsubscribe by emailing 
> discuss-unsubscribe AT lists.opennicproject.org

--
Low-Cost No-Risk Pilots for Transitioning to Industry 4.0 - a Linux User 
Group for the Manufacturing Sector